How to Measure a Door Opening for a Quote
Record the opening, surrounding wall and obstacles so a supplier can review the proposed door set. Include a sketch with the measurements.
Identify the opening
Label the opening by room or drawing reference and state whether you measured the opening before or after finishes. Mark the finished floor level, particularly if flooring is still to be installed.
Record widths, heights and wall thickness
Take width measurements at the top, middle and bottom, and heights on both sides and at the centre. Record each reading and its position with units. Note wall thickness at the edges and flag gaps, uneven walls or an out-of-square opening.
Add swing and nearby clearances
Draw the opening direction and show nearby walls, switches, skirting and furniture. For a round-top door, add the height at which the curve starts and a drawing of the curve. For a sliding design, mark available wall space and headroom.
Confirm which dimensions the supplier needs
Send the recorded opening dimensions before agreeing on leaf or frame dimensions. Ask the supplier to confirm allowances and issue the proposed sizes for review before manufacture.